pix

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name£º 2/4/6/7 Ports Fast Ethernet Switch
Product Model£º CL-SW401/SW701
Overview:
This Fast Ethernet Switch can be used for extending the transmission distance between two Fast Ethernet devices via fiber cable transparently with no performance degradation.Auto-negotiation allows the converter to operate in either MDI or MDI-X crossover for direct connection to either of the workstation, Switch or Hub.Auto-negotiation allows the converter to operate in either full or half duplex mode.And this equipment also features auto-negotiation in either 10Base-T or 100Base-T mode for dual speed model.
 
Feature:
1.  4/7 high-powered RJ-45¡¯s port of 10/100Mbps self-adaptive (Auto MDI/MDIX)
2.  1 100M(single-mode/multi-mode)optic port
3.  Providing table top and frame type install
4.  Support VLAN and Trunking
5.  Buffering:1M
6.  Address table filtrate:1K•
7.  Follow the fast Ethernet standard of IEEE802.3 10BASE-T¡¯s Ethernet and IEEE802.3u 100BASE-TX
8.  Support all protocol in public, eg: TCP/IP, IPX, XNS, Appletalk, Vines, DECnet, ARP, DECLAT and Lansoft etc.
9.  4/7 10/100Mbps self-adaptive ports (Auto MDI/MDIX)
10. 1 100M(single-mode/multi-mode)optic port
11. The self-diagnostic function can obviate network mal-function
12. Providing table top and frame type install
13. High speed cascade connection port used to link higher layer Switch or other device
14. The dynamic buffering equipped by equalizing network load and to prevent the f blockage from losing
15. All ports possess self-adaptive and full /half-duplex ability
16. The face plate indicator lights keep watch on the work state, hence overall SmartWatch function can simplified the solving of malfunction
17. Choose fast storage, transmit and directness transmit mode automatically in order to reduce the delay
18. Provide the maximum bandwidth to 1Gbps, 100% transmit data rate
19. Filter broadcasting storm
20. Line speed is filtrate / transmit
21. Support VLAN and Trunking
22. The dynamic bandwidth equipoise
23. Automatic MAC address learning function
24. The entire compatibility standard of Ethernet application
 
Specification:
Power
AC Input
100~240V
DC Input
-48V
Power Consumption
¡Ü3W
Ethernet ports
Standard: IEEE 802.3, 802.3u.10/100M electrical Port, MDI/MDIX auto negotiation, Half/ full duplex
Qty
1 RJ45 connector
Fiber interface
Rate
155Mbps
Line code
1B1C
Wavelength
850nm/1310nm/1550nm
Connector
FC/SC
Distance
0-120Km
Environment
Operation Temperature
0¡ãC~50¡ãC
Operation Relative Humidity
20~90%
Store Temperature
-20¡ãC~65¡ãC
Store Relative Humidity
10~95%

Application:
 
wavelength
connector
TP port
Fiber
TX power(dBm)
Sensitivity (dBm)
Max distance
1310nm
SC
RJ-45
multimode
-22 to -12
¡Ü -30
2km
1310nm FP
SC/FC/ST
RJ-45
Singlemode Double fiber
-15 to -8
¡Ü -37
25km
1310nm FP
SC/FC/ST
RJ-45
Singlemode Double fiber
-8 to -3
¡Ü -37
40km
1310nm FP
SC/FC/ST
RJ-45
Singlemode Double fiber
-3 to 0
¡Ü -37
60km
1550nm DFB
SC/FC/ST
RJ-45
Singlemode Double fiber
-8 to -3
¡Ü -40
80km
1550nm DFB
SC/FC/ST
RJ-45
Singlemode Double fiber
-3 to 0
¡Ü -40
100km
1550nm DFB
SC/FC/ST
RJ-45
Singlemode Double fiber
0 to 3
¡Ü -40
120km
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Order Info.:
P/N
Description
CL -SW201
2*10/100Base-T 1*10/100Base-Fx Fast Ethernet Switch
CL -SW401
4*10/100Base-T 1*10/100Base-Fx Fast Ethernet Switch
CL -SW701
7*10/100Base-T 1*10/100Base-Fx Fast Ethernet Switch
CL -SW621
6*10/100Base-T 2*10/100Base-Fx Fast Ethernet Switch
CL- SW6021
6*10/100/1000Mb 2*10/100/1000Mb Ethernet Switch