pix

CuteLink Product

Trust our experience to build your network

An Innovative Access Solutions & Equipments Provider

MSAP MSTP SDH,PDH Optimux Multiplexer,Fiber Modem,EOP Protocol Converter,PCM,TDM Over IP,EOC Cable Modem,GPON&EPON OLT&ONU,PTN CPE Access Devices,IP-OAM Devices

Your Location: Home >> CuteLink Products

Product Name Cable modem slave device
Product Model CL-CM02
Name:  CL-CM01 Cable modem master device
              CL-CM02 Cable modem slave device (Cable Modem)
              Ethernet and TV over Cable
               
*Cable modem master device                    *Cable Modem
Overview:
This solution is based on the original HFC connectivity without affecting the present CATV operating. The solution adopts the latest Modulation technology to consolidate Ethernet and CATV signals to transmit and complete the triple play: voice, video and data over a single coaxial cable. The solution can use less reconstructing cost and smaller project job to change the original unidirectional CATV network into a bi-directional and multi Cservice broadband network platform. It is unnecessary to reconstruct the original CATV network. It possesses good adaptability and flexible connectivity and brings a brand-new concept for radio & TV system.
 
Feature:
1. Developed from the integrated circuit with our own property right.
2. Able to send and receive Ethernet and CATV signals over coaxial Ccable without affecting sending and receiving of CATV signal
3. Data rate up to above 45M on the Master. The Master can connect 32 Nos of the Salves at most.
4. Multi slaves can share bandwidth of the Master. This means the bandwidth can be configured randomly.
5. The bridge can extend transmission distance of CATV signal. Can connect all kinds of CATV signal amplifier to realize bi-direction transmission.
 
Specification:
Power
AC Input
100~240V
DC Input
-48V
Power Consumption
3W
RF Channel frequency 230MHZ
Output Power
3055dB
Receive Sensitivity
50dBm
Connector   F type Female socket(metric system)
Output impedance
75
Modulation mode APSK BPSK QPSK QAM auto-sensing
Data rate
200Mbps
Throughput rate
50Mbps
Ethernet Connector RJ-45
Standard    IEEE802.3,IEEE802.3af,10/100Base-T
Smart bit
60K~1522K
Operating Temp
4080
Size
Master: 191mm263mm76mm
Slave: 140mm106mm38mm
Power consumption
<10W
Relative Humidity
Less than 95%
Gas pressure
70kpa~106kpa
no causticity gasno dustno magnetic field disturb
In the field, there is no filter noise problems. when working at  4080, no hang
Environment
Operation Temperature
0~50O
Operation Relative Humidity
20~90%
Store Temperature
-20~65
Store Relative Humidity
10~95%
Application:
Diagram 1
 
Diagram 2 An amplifier is connected  in the connectivity diagram as follows: